How to fit blinds step by step

Do you want to install a blind on your bedroom, living room or kitchen windows? These products are ideal because they allow you to regulate the entry of light and, at the same time, they are a great decorative alternative that gives a elegant and modern touch to your homeTherefore, in this post we show you how to install blinds step by step.

Types of blinds

A blind is a product that is characterised by being a thin curtain that unfolds vertically; its function is to soften the entry of light, so that UV rays do not fall directly on your furniture. Below we show you the main types of blinds currently available:

• Roller blindsThe fabric is wound around a rod; they are ideal for horizontal or slanted windows. They are the most popular alternative, as they are more comfortable to operate and have a longer life span. These products are widely used in modern spaces.
• Roller blindsThe product has several horizontal rods; they have a string system at the back that allows the product to be folded.
• Foldable blindsThe folding of the folding system: as in the previous option, the fold is made in the upper part; this product does not have rods, which means that it folds from the lower part. One of its main characteristics is that they are designed for rustic styles.
• Puffed blindsone of its main features is that the fabric is gathered at several points.
• Japanese blindsare characterised by independent overlapping panels that allow light to filter through; they are also often used to separate rooms.

How to fit blinds

Here we show you how to place blinds in the windows of any room. step by step:

Where to install the blind

The first thing you need to know is where you are going to fix the blind; if the blind is to be fixed, it is important to know where you are going to fix it. window is located against the wallThe blind can be installed by superimposing the blind on the outside of the frame, provided that there is enough space to open the window. The blind shall be 5 cm larger in height and width than the window.

On the other hand, if the window is in line with the wallIn this case, it is best to install it against the wall, above the window; in this case, you should add some brackets to leave enough space for the handle. The blind should be 10 cm wider and higher than the window.

Another option is to place the blind in the window sash itselfThe blind opens when the blind is lowered.

Materials and tools you need

Below you will find the materials and tools you need to fit your blinds.

• Roller blind: the best thing to do is to buy it from our online shopWe have a wide variety of made-to-measure roller blinds, so that you can choose the alternative that best suits your needs.
• Flexometer.
• Drill screwdriver.
• Tacos.
• Screws.
• Hammer or mallet.
• Pencil.
• Staircase.

Steps to follow

Do you already have all the materials? Here's how to install the blinds in your home. 7 easy steps:

1. Pull out the blindAt this point, you must check that no parts have come loose and that the mechanism is working properly; you must observe where the up and down chain is located, in order to fix the mechanism properly during installation.
2. Take the measurements of your windowThe first thing you should do is measure the width of the window opening; you should also measure from the middle of the guide that will support the fabric to the bottom edge of the roller blind.
3. Mark the fixing pointsYou must transfer these measurements to the wall and mark the fixing points, along the width of the window opening; you must also mark the height at which the guide will go, checking that the window can be opened.
4. Drill the holesIt is important to note that if you want to prevent dust from falling on the floor, you should hold an envelope by the adhesive side under the place where you drill the hole.
5. Put in the studsThe following steps are required: Insert the dowels into the holes, using a hammer or mallet, then screw the plates into place.
6. Fits the blind guideYou have to fix them on the plates, pulling them towards the bottom and checking that the bar is perfectly fixed.
7. CheckFinally, you must raise and lower the blind with the cord to check that it is working properly; we also recommend that you open the window to check that there is no problem.

How to overcome wall obstacles

You should take into account whether there are any protruding object on the wallThe most common are the roller blind drum, the window handle or a radiator, among others.

Most commonly, blinds have a support about 4 cm longTherefore, if you have an overhang in the opening where you are going to place this product, you will need the blind to have brackets about 7 cm long.

On the other hand, if the obstacle measures more than 7 cmIt is best to use a square, although you should be careful that it does not protrude too far to prevent it from sagging under the weight of the blind. Similarly, if the overhang is more than 10 cm, it is best to fix the blind to the ceiling.

How to fit blinds without drilling

If you want to install blinds in your window but don't want to drill any holes, here we show you how to do it. 2 options for fitting blinds without drilling.

With adhesive backing

These brackets are glued to the window frame and make the blinds easy to handle; in addition, the blinds can be easily removed from the window frame. adhesive roller blinds are a very economical alternative and do not take long to install. One of the MAIN ADVANTAGES is that the blinds are allowed to be placed on surfaces such as glass or tiles.

1. Clean the surfaceYou must do it with alcohol.
2. Marks the position of the adhesive mountsWhen you have them, stick them on the window frame and remove the protective paper.
3. Install the blindThe best thing to do is to start on the side of the cord.

With regular couplings

Another option to enjoy blinds without to make a single hole is by using regular hooks. This option is highly recommended for areas that may be damaged by adhesive or where these products are not effective and can hold up to 10 kilos.

The adjustable hooks are a pair of unobtrusive brackets, which are fixed to the top edge of your window. Their installation is very easy easy and simpleYou only need to use an Allen key and a screwdriver to fix the screws.

Advice

Now that you know how to install blinds, here are a few tips to help you to purchase the best option and install it in the most effective, quickest, simplest and most economical way.

• PrivacyIf you want to maintain privacy in your home, the best thing to do is to opt for a translucent roller blindThis alternative allows you to maintain the brightness without anyone being able to see absolutely nothing of what is going on inside your home.
• VarietyOne of the advantages of choosing our online shop is that we offer you a wide range of roller blinds. In Sistemas 24H you can find Screen blindstranslucent, opaque, bedroom, fabric and showcaseso that you can choose the alternative that best suits your wishes and your stay.
• Rustic styleBamboo blinds are highly recommended for homes with a rustic décor.
• Blind sizeThe roller blind should ideally be 20 cm wider than the window, 10 cm on each side; in the case of wall installation, leave a margin of 10 cm at the top.
• QualityIt is essential that you opt for a quality blind, such as the ones you can find in our online shop; this way, you will know that it will last for many years in the best conditions.
• Choose the side of the chain: most often it goes to the right.

Now that you know how to install blinds, what are you waiting for to enjoy these decorative elements in your home?