How to clean blinds night and day

Blinds are decorative elements that are characterised by being a type of curtain that is hung and gathered vertically. Have you heard of night and day products? In this post we show you what they are and how to clean blinds night and day.

What are night and day blinds?

Night and day blinds are a type of roller blinds made from a technical fabricThese products consist of horizontal translucent and opaque strips, so that you can obtain greater comfort and it is easier to regulate the entry of light in all rooms.

It is important to note that, when the front and rear layers are perfectly aligned, the overall effect The light penetration is greater, whereas if they are counter-transparent, so that only the opaque bands are visible, the light penetration is less.

Features

Below we show you the main features of the blinds night and day:

• Double layerThese roller blinds feature a combination of transparent and opaque horizontal strips.
• Creating different light combinationsYou can achieve this by raising and lowering the side cord; in this way, you can let in little light, with a blind-like effect, or you can let in more sunlight.
• VarietyYou can install the night and day blind in any room of the house.
• Down to the groundOne of the main characteristics of night and day blinds is that they reach all the way to the floor, so you should be aware of any obstacles, such as handles or radiators, when measuring.
• Upper skirtThe roller blind is highly recommended to hide the mechanism that allows the blind to be rolled up; this alternative depends on your taste, although they are ideal for highlighting the blind.

Installation

To install the blinds night and day, the first thing to do is to leave the blinds in place. 10 centimetres on each side of the door or window; the length depends on your tastes and needs. When buying the blind, it is best to choose a specialised shopas Sistemas24H, as you can buy your product made to measure. Here we show you step by step how to install blinds night and day at your doors and windows:

1. Take appropriate actionYou must leave a minimum distance of 2 cm between the night and day blind and any obstacles you may have.
2. Position the drawer supportsMeasure the middle of the window in the upper frame and make a small mark; when you have it, you have to make a vertical line to the ceiling; then you have to measure the distance from the middle of the blind to the ceiling and subtract 5-10 cm, this is where the right end of the blind box support will be located.
3. Mark the holesYou must ensure that the bracket is parallel to the wall and when you have the first one, repeat the steps for the opposite one, then drill the holes, insert the dowels and screw the brackets to the ceiling.
4. Centres the drawer night and dayThe distance from the window frame to the end of the drawer must be the same as the distance from the window frame to the end of the drawer.
5. Attach the drawer to the bracketsFirst you have to insert the rear slit into the brackets and then press the front spring protrusion, so that it presses towards the top and the bracket locks into both slits.

How to clean blinds night and day

Night and day blinds offer a increased daytime visibility and provide impressive privacy at night; it is essential to clean the blinds, to remove dirt and keep them in perfect condition, so that they last longer. What is the best way to clean blinds night and day? Here's how to clean your blinds step-by-step process:

1. MaterialsAll you need is a bucket of water, neutral soap and a sponge; you should also have a separate cloth for drying the blinds.
2. Pull out the chains from one of the two ends.Then you have to unroll the blind and lay it on a smooth surface.
3. Clean the blind night and dayTo do this, pour neutral soap into the bucket with hot water and then wipe it off with a damp sponge, but not too much water.
4. Wait forBefore rinsing, you should wait 5 minutes, so that the product can take effect.
5. ClarifyUse another clean, damp cloth, but without any product, and rinse the blind.
6. DryFinally, you only have to wait 15 minutes for the night and day blind to dry completely; when it is completely dry, you can hang it up again.

Maintenance of blinds night and day

It is essential that you clean the blinds every night and day from time to time, so that they will stay clean. keep in perfect condition and make your stay look perfect for a longer period of time.

To ensure proper maintenance, it is best to clean them, even superficially, on a regular basis, e.g. by wiping them down with a dry cloth or duster regularlyto remove dust and surface stains.

It is also advisable that, from time to time, you perform a ultrasonic cleaning. This method consists of using hot water and detergent, using an intense sound wave movement to descale and remove dirt, dust, grease, nicotine and bad smells from the blinds night and day.

Tricks

Here we bring you some tricks that can help you to ensure that your blinds are in perfect condition day and night:

• Digital printingIf the blind has this type of print, it is best not to use a damp cloth or rub it, as you could remove this mark; in this case, use a feather duster or delicate gauze, with gentle touches, to make the stains disappear.
• Complicated spotif the blind is digitally printed and needs to be cleaned thoroughly, it is essential that you use a very slightly damp cloth and rub, but do not rub too hard.
• Antistatic fabricsOne of the great advantages of night and day blinds is that they repel dust, so you only need to clean them from time to time to ensure a longer life.

In short, now that you know how to clean blinds night and day, what are you waiting for? keep them in perfect condition for longer and ensure greater durability?