How to clean blinds with a steam cleaner?

Blinds are one of the most important home accessories which over time accumulates a lot of dirt and dust, which in the long run becomes a hygiene problem for your home and can end up damaging it.

If you neglect their cleaning, they can lose some of their properties due to lack of care. Nowadays, with the equipment available on the market such as steamers, are one of the natural ways of cleaning and disinfecting the shuttersIt represents an alternative to conventional cleaning methods.

It does not damage the environment and allows you to clean the place where conventional methods would not reach and the blinds are completely clean. In addition, now with the steamers this work is done convenient, simple and quickThe blinds are kept in perfect condition.

Steps to clean blinds with steamers

1. You must ensure that the material of the blinds allows you to use steam cleaning without damaging them.
2. For the cleaning of blinds apply a steamer, using it from top to bottom until steam is applied to the entire blind.
3. Subsequently, you have to Remove dirt stains with a damp cloth. If you have removed any dirt that has appeared over time, clean the inside of the roller shutter and then the outside.
4. Once the previous step has been completed, dry the blinds with a dry cloth and gently until all moisture is removed from the blind.
5. If the shutters are made of vertical extension, You should remove the cover of the drum where the roller shutter is rolled up in order to access the shutters more safely and to be able to clean the outside of the roller shutter without risk.
6. Afterwards, pull down the shutter little by little to clean slat by slat. If the top of the blind is too high and you can't reach it, you can use a stick and place a cloth at one end to clean it without using ladders.
7. For the drying of the shutter use a soft cloth to remove moisture. It is important not to forget to clean the strap thoroughly.

Tips for steam cleaning blinds

• The vaporeta is the ideal equipment to clean blinds because of the combination of temperature and steam pressure it uses to loosen dirt, grease and stubborn stains, without the need for chemicals.
• This method is very economicalYou only use water and it is converted into steam for cleaning. They also save energy.
• The steam only loosens dirtIt does not remove it, so when you use steam on any surface you should wipe with a dry cloth to collect the dirt that comes off.
• This is important for your safety. The steamer works with steam, which reaches very high temperatures, take the necessary precautions to avoid getting burnt.
• By the time you do the general cleanliness of the houseIf you have to clean the blinds first before starting on the rest of the house, this will prevent dust and dirt from getting into the bedrooms and living rooms.
• Take into account the place where the blinds are installedIf they are outside, they are more exposed to soiling, but if they are inside, they are easier to clean.

Some considerations

• Do not use steam on painted wallsThe following items can be found on the market: waxed or polished articles, cork flooring, musical instruments, paper and cardboard products, delicate fabrics such as silk or antiques.
• If you are not sure whether the surface shall resist vapour, apply a small amount to one corner.
• If your water is hard, use distilled water to refill the steamer, so that limescale does not build up.