English 
Español 
Português 
Français 
Italiano 
Deutsch 
My automatic roller shutter won't come down, how do I fix it?
We already know the big ones advantages of home automationBut, like everything else in life, this one is flawed. But there is no need to panic. Your automatic roller shutter doesn't go down? We have several solutions to get it working again - read and find out!
How can I fix a blind that won't go up or down?
Chances are that your roller shutter does not go down because it is hooked. This can be due to a number of reasons:
- Incorrectly installed rope.
- Deteriorated slats.
- Lamas out of place.
- Spring or strap wear.
- Breakage of roller shutter stops.
- Problems with motorised blinds.
The slats are the strips that make up the shutter panel. Often, blockages are caused by a slat that is loose or bent. It is therefore advisable to aligning the louvre blades if yours does not go down.
For fix the shutterDismantle its drawer and check the condition of the elements inside:
Crooked slats? Straighten them outBroken strips? Replace them with new ones. When you have made the necessary changes, put everything back in place and check that the shutter is working again.
And if the panel slats are broken?
Don't get exasperated, the slats will break sooner or later.
TIP: as soon as you realise that one is broken, replace it.
Otherwise, the shutter will jam and you will find yourself calling in a professional for help.
Better to avoid getting to this point, right?
Don't worry, that changing a shutter slat is quite easy.
We have a post dedicated exclusively to this task, but to summarise:
- Remove the end slat stops.
- Extract it from the guide.
- Remove the slats one by one until you find the one you want to replace.
When you have finished, open the shutter again and insert the end slat between the guides.
Close it completely and put the stops in place.
Check if the shutter is now lowered.
Automatic roller shutter does not come down: repair
But, how to fix an electric blind? If this is your case, the first thing to do is switch off the roller shutter motor before getting down to work.
Next, tighten the screws from the boundary downwards if you find it difficult to close your venetian blind.
With a screwdriver, turn the screw towards:
- Right: to add travel.
- The left: to subtract from it.
It's time to see if what we've done has done any good: The shutter goes down? Great, it doesn't? Then let's call the manufacturer.
This is especially relevant when you notice that the unit overheats during use.
The shutter neither goes up nor down
Does your blind get too hot and then it doesn't work any more? This is common when it is used continuously and suddenly. We therefore advise you to wait until the engine has cooled down. Use it half an hour later.
It may also be that the engine turns out to be faulty and does not fulfil its function. Sometimes these products have factory defects. To avoid further problems, contact the manufacturer.
Shutter does not go up or does not go down completely
When the shutter is stuck in the middle (in other words, neither fully open nor fully closed), you don't have to worry. Chances are that it will only some screws are incorrectly tightened.
Identify what they are. To do this, look on the side.
To solve your problem, just turn the screws using a screwdriver. You can start turning clockwise.
Shutter malfunctioning
We are talking about a problem that may be more complex, given that it may be due to the damaged wiring.
The keys must be revised, but not before switching off the electricity. Do not tamper with the wiring without doing this first.
When you have removed the lightIf there is any damage or loose connections, you will be able to check for damage or loose connections.
Breakage of the roller shutter motor
The operation of the motor of an automatic roller shutter can also cause blockages.
A quick and cheap solution is to:
- Reprogramming the control activating the engine.
- Reconfigure the limit switches.
- Tighten any cables that may have come loose.
If the shutter still does not come down, you will have to call in a technician.
Blinds cleaning
When the shutter finally comes down, take the opportunity to give it a good cleaning.
Check all its components: guides, slats, tape, etc. Keeping it free of dirt will prevent clogging..
At Sistemas24H, we teach you how to clean a blind.
How much does it cost to repair an electric roller shutter?
It is difficult to give you an accurate repair price if your automatic roller shutter does not come down, as many factors are involved. For instance, businesses or professionals will offer different rates for such repair.
Conclusion
Now you know what to do if your automatic roller shutter does not come downYou can finally fix that shutter that stays up!
