24H Systems Logo
Phone. 926531113 - M-F: 9:00 to 14:00 and from 16:30 to 19:00
Phone. 926531113 - M-F: 9:00 to 14:00 and from 16:30 to 19:00

PVC roller shutter 37mm Curve

( 4.7 / 5 of 25 opinions )
Estimated delivery in 24/48 hours

The design of our PVC models are studied to meet all current requirements. Slats with high performance against solar radiation and that, in their manufacture, the raw materials used are of the highest quality, highlighting that they are completely free of lead as a stabilising agent.

  • 37 mm curved pvc slat free of Lead.
  • Tops and Braces included.
  • Micro-ventilation system.
  • Compatible with window and door installation.
  • Made to measure: Max height 250 cm x 210 cm max width.
  • If you need spare parts or accessories click HERE.
Configure your shutter to MEASURE
Important 
Measuring correctly is essential to ensure that your product is properly configured. That's why we have measuring guides for all our products, as well as technical specifications for each of them
1. Enter your measurements here
min: 20cm, max: 260cm
min: 20cms, max: 210cms
×

How to enter measurements

They should always be put in centimetres and when we need millimetres we will put a comma or full stop.

Example: 110,5 = 110 centimetres and 5 millimetres

White (+...)
Ivory (+...)
Grey (+...)
Wood (+...)
×

If you need reduction guides V-25

Machining or Guide Funnel INCLUDED.


This is the key point when it comes to measuring the WIDTH of our roller shutter.

We will need REDUCTION GUIDELINES whenever the width of our old guidebook mida over 1.6 cm.

, ,

If we need reduction guides we will measure the WIDTH like this:

, ,

If, on the other hand, we do not need reduction guides, we will measure the WIDTH as follows:

, ,
The PVC trim is standard and the aluminium trim is optional.
PVC trim
Aluminium trim (+7,50€)
×

Drive required Motor

If you wish to motorise your roller shutter, we offer both push-button and radio remote control motors.

We have engines for 40mm AXLE and 60mm AXLE being last the most recommended to support larger blinds and have a more affordable price.

We have to take into account the axle we have for a correct installation.

The motors include a gear bushing and side bracket to be screwed to our drawer or wall.

, ,
, ,

If MOTOR is selected, no holes will be drilled in the aluminium end cap.


Please note that if you already have an MOTOR you will have to tell us in the order notes that we do not add the holes to the lower end.

×

Neutral Silicone 300ml

There are many times that due to irregularities in the walls or to make our mosquito net completely watertight we need a good silicone.

Available in a multitude of colours to match our mosquito nets.

, ,
×

Tops and straps

With your roller shutter we include 2 buffers for the bottom trim and 2 braces to be installed on the top last slat and to be able to hook onto the metal shaft.

, ,
YES INCLUDED
×

Complete kit of accessories for roller shutter 60mm axle

It includes all the necessary accessories to change our roller shutter: Shaft, Capsule, Disc, Tape Passer, Holders and Picker.


The 60mm octagonal shaft will be sent 20 cms wider than the width of the blind, if you want it to be an exact size, just write it in the notes or observations of the order.


, ,

not included
YES INCLUDED (+39,95€)
Product total
Options total
Grand total
Finance your payment from €100 with
Aplazame logo
Do you have any questions or need help?
Call us: 
926531113
YOU CAN RELY ON SISTEMAS 24H
GUARANTEE 3 years
More from 815.000 decorated windows

Its articulation and operation allow the entrance of sunlight to be adjusted at will until it is completely cancelled, as well as maintaining control of ventilation. With these practical characteristics, the roller shutter has become an essential element for construction.

It decorates facades, controls the intensity of sunlight and allows ventilation or airtight closure, either manually or by electric operators.


With this product we send you:

- Blinds cut to size with PVC slats 37 mm Curved.

Finishing touches

- V-25 guides (if roller shutter with guides is selected).

2 straps or straps for fastening.

-2 stops in the colour of the blind.

NOTE: Does not include aluminium crate, only the above described.


Use of this type of blind

Windows and doors are the most sensitive point (thermally speaking) of any type of building, where most energy is wasted both in winter and summer.

For this reason, the choice of a good roller shutter is essential for any type of building work, whether it is a new construction or a refurbishment.

Thanks to a complete range of colours in profiled aluminium slats with optimum aesthetic and mechanical performance, we can attenuate this energy flow and offer greater solar protection.


Drive

We can comfortably raise and lower our roller shutter with three types of drive.

  • By means of 20 mm tape designed to support the weight of our blinds. This is the most commonly used way of operating this type of roller shutter.
  • By means of a lathe with a steel cable and operating a crank handle for raising and lowering the shutter. Widely used in hospitals and social centres for its comfort.
  • Via engine, either with pushbutton or with remote control.

How to Measure    , ,

Reduction guides will be needed when our old guide is wider than 1.6 cm.

If we need the roller shutter and the reduction guides:

The Width is taken by inserting the metre into the bottom of one of the guides, up to the outer edge of the opposite side. This is the measurement to be provided with your order.

, ,

The High will be the size of your window or door with an increment of  25 cms, This increase is necessary in order to be able to attach the blind to the upper shaft. This will be the measurement you will need to provide when ordering.

Reduction guides are required if the old roller shutter has a gap of 1.6cm or more in the guide and if the sides are not fitted with a doormat.

, ,
, ,

The reduction guides shall be embedded in the recess on each side and glued with silicone, any other adhesive or the Grapers system.

If you only need the blind:

If your rails are less than 1.6 cm you do not need to install reduction rails, you only need the blind.

We will take the width as in the image below (from the bottom to the bottom of the shutter channel) we will deduct 1 centimetre from this measurement so that the shutter has clearance and does not rub when it is operated.

, ,

The High will be the size of your window or door with an increment of  25 cms, This increase is necessary in order to be able to attach the blind to the upper shaft. This will be the measurement you will need to provide when ordering.


How to install this blind step by step


Diameter of ROLLING

pvc roller shutter 37mm curve

Spare parts and accessories for roller shutters

You can select a complete KIT of accessories for your roller shutter which consists of the following: 

PDF

  • Axis
  • Capsule
  • Disc
  • Supports
  • Dustpan and belt
  • Passing tapes

If you need axle, dustpan, belt etc etc... they are available in this category.:   HERE.

If you need loose slats for the repair of your roller shuttersHERE.


Protection and resistance

All our louvres are an obstacle to solar radiation. They protect the occupants in the dwellings where they are installed, offering a total guarantee in their use, since they do not degrade due to the action of UV rays.

Its quality will avoid extra energy expenditureThe slats are designed to prevent the unwanted flow of heat or cold through your window. Especially our wide range of profiled slats with expanded polyurethane injected on the inside, offers higher insulation values than those of our standard windows. will contribute to an optimisation of the household economy.

It offers protection against environmental noise from the outside, thanks to the qualities of PVC .


Cleaning and maintenance

A simple cloth and soapy water will suffice to clean the aluminium roller shutter and guides, it does not allow the use of harmful household cleaners.


Delivery time

The delivery time will be 2 to 3 working days for WHITE, IVORY and BROWN colours.

For GREY colour from 3 to 7 days.


Frequently asked questions

Should I take exact measurements?

Yes, the more accurate the better to avoid problems during installation.

Do you add to or subtract from the measurements in the order?

We will manufacture to the size provided by the customer, who will increase or decrease what is necessary as indicated in the section of how to measure.

Technical characteristics

Additional information

Lama

37mm Curved

PVC slat colours

White, Grey, Wood, Ivory

Product ratings
Product image

Curved PVC shutter 37 mm

product ratings 25
Product rating 4.7/5
Product experience

Calculated from 8 Customer ratings (last 12 months)

Positive
96%
Neutral
0%
Negative
4%

latest ratings

13/08/2023

Well

07/08/2023

good material

05/07/2023

Good value for money

24/11/2022

Very happy.

17/11/2022

meets all my expectations.

30/08/2022

Totally perfect.

18/08/2022

It looks good, they seem to be of quality. In time we'll see if this is the case or not.

17/08/2022

It is an excellent product.

07/08/2022

Suitable PVC material as advertised

31/07/2022

Nice, light weight, only, if the shutter box is on the outside of the window, the curved part will be on the outside and if it is on the inside, the other way round.

Similar Products

Total product:

26,90

VAT included
Estimated delivery in 24/48 hours
CONTACT US
If you need us to help you choose the product that best suits your needs, or if you have any questions, please contact us.
CONTACT US
SAFE PURCHASE
Online Trust is the leading quality seal for the internet in Spain. It is a distinctive seal displayed by companies that guarantee maximum transparency, security, and trust when buying and browsing their websites.
PAYMENT METHODS
SHIPPING
24H Manufacturing
Shipping 24/48h
SAFE PURCHASE
Online Trust is the leading quality seal for the internet in Spain. It is a distinctive seal displayed by companies that guarantee maximum transparency, security, and trust when buying and browsing their websites.
CONTACT US
If you need us to help you choose the product that best suits your needs, or if you have any questions, please contact us.
CONTACT US
PAYMENT METHODS
SHIPPING
24H Manufacturing
Shipping 24/48h
crosschevron-left
    0
    MY CART
    Empty TrolleyBack to the Shop
      Calcular envío