Measuring correctly is essential to ensure that your product is properly configured. That's why we have measuring guides for all our products, as well as technical specifications for each of them
The 43 mm curved HIGH DENSITY aluminium thermal louvres, in addition to having the best pre-lacquering, have an unbeatable thermal and acoustic insulation, their slats are filled with rigid expanded polyurethane foam of HIGH DENSITY and thermal-insulating without fluorocarbon. Our advanced technology allows us to offer shutter models designed to meet all current requirements.
It decorates facades, controls the intensity of sunlight and allows ventilation or airtight closure, either manually or by electric operators.
High Density
Normal profiled aluminium slats have 90 Kg/m³ of POLYURETHANE foam inside, high density slats contain double the amount of POLYURETHANE foam 180 Kg/m³.
This means that the shutter is much more rigid, so we can order widths greater than 200 centimetres, at the same time, the thermal and acoustic transmittance is much lower towards the inside of the house.
How to Measure
Everything will depend on the width of our old guide rail to know whether we need guide rails or not, and on that we will measure one way or the other.
Reduction slides are needed when our old slide has a gap of more than 1.6 cm.
If it measures more than 1.6 cm and we need reduction guides:
If your tracks are longer than 1.6 cm you will need to install reduction tracks and therefore you will need the shutter and the V-25 tracks.
The Width is taken by inserting the metre into the bottom of one of the guides, up to the outer edge of the opposite side. This is the measurement to be provided with your order.
The High will be the size of your window or door with an increment of 25 cms, This increase is necessary in order to be able to attach the blind to the upper shaft. This will be the measurement you will need to provide when ordering.
Reduction guides are needed when the old roller shutter has a gap of 1.6cm or more in the guide and when the sides do not have a mat.
The reduction guides shall be recessed into the recess on each side and glued with silicone, any other adhesive or with the system Grapers.
If it measures - 1.6 cm and does not need reducer guides:
If your tracks are less than 1.6 cms you do not need to install reduction tracks and therefore only need the roller shutter.
We will take the width as in the image below (from the bottom to the bottom of the shutter channel) we will deduct 1 centimetre from this measurement so that the shutter has clearance and does not rub when it is operated.
The High will be the size of your window or door with an increment of 25 cms, This increase is necessary in order to be able to attach the blind to the upper shaft. This will be the measurement you will need to provide when ordering.
How to install this blind step by step
Drive
We can comfortably raise and lower our roller shutter with three types of drive:
Via tape 20 mm. designed to support the weight of our blinds. This is the most commonly used way of operating this type of roller shutter.
By means of a lathe with a steel cable and operating a crank handle for raising and lowering the shutter. Widely used in hospitals and social centres for its comfort.
Via engine, either with pushbutton or with remote control.
Lateral anti-slip
The slat stitching system avoids snagging or breakage of the slats in our blinds.
You can also order side anti-slip clips for installation on the slats of your roller shutter. PERSICLIP'S .
It is a quick to install system, which gives an unbeatable result.
Safety clamps
They are inserted between the guide and the shutter, which makes it very difficult to raise the shutter. 2 units are shipped.
Spare parts and accessories for roller shutters
You can select a complete KIT of accessories for your roller shutter which consists of the following:
If you need this kind of complements are available in this category: HERE
Protection and resistance
All our louvres are an obstacle to solar radiation. They protect the occupants in the dwellings where they are installed, offering a total guarantee in their use, since they do not degrade due to the action of UV rays.
Its quality will avoid extra energy expenditureThe slats are designed to prevent the unwanted flow of heat or cold through your window. Especially our wide range of profiled slats with expanded polyurethane injected on the inside, offers higher insulation values than those of our standard windows. will contribute to an optimisation of the household economy.
Our roller shutters also offer protection against ambient noise from the outside, thanks to the qualities of aluminium and a high-performance polyurethane interior.
The wide range of models, sizes, colours and finishes in all our slat models allow us to offer a fully guaranteed solution, specific to each need.
With this product we send you
- Blinds cut to size with 43mm High Density Curved aluminium thermal louvres 43mm High Density Curved.
- Finishing touches aluminium with channel for bolts (Optional locks).
- V-25 guides (if roller shutter with guides is selected).
- 2 Tie rods or straps.
-2 stops in the colour of the blind.
NOTE: Does not include aluminium crate, only the above described.
Cleaning and maintenance
A simple cloth and soapy water will suffice to clean the aluminium roller shutter and guides, it does not allow the use of harmful household cleaners.
Delivery time
We have qualified staff who will manufacture your shutter within 1 to 2 working days.
The shipment will take 24-48h depending on the area.
Frequently asked questions
Should I take exact measurements?
Yes, the more accurate the better to avoid problems during installation.
Do you add to or subtract from the measurements in the order?
We will manufacture to the size provided by the customer, who will increase or decrease what is necessary as indicated in the section of how to measure.
Technical characteristics
Additional information
Drive
By belt, Motor, Lathe
Sound insulation
Yes
Thermal insulation
Yes
Solar control
Yes
Place of installation
For doors, For windows
Lama
45mm Curved
Microventilation
Yes
Auction
Lacquered aluminium
Type of opening
Vertical
Type of installation
Between guides
Product type
Aluminium roller shutter curtain
Aluminium Slat Colours
Blue Ral-5010, White, Bronze, Golden Oak Ember, Golden, Graphite Grey, Grey Ral-7011, Grey Ral-7016, Grey Ral-7022, Stainless Steel, Light Wood, Dark Wood, Ivory Ral-1015, Brown Ral-8014, Brown Ral-8017, Black, Walnut, Gold, Oxidon Brown, Pine Knot, Silver, Oak-Gold, Red Ral-3005, Red Ral-3007, Green Ral-6005, Green Ral-6009
Product ratings
Product name not available
product ratings73
Product rating4.8/5
Product experience
Calculated from 0 Customer rating (last 12 months)
Positive
0%
Neutral
0%
Negative
0%
latest ratings
12/08/2023
Well
30/06/2023
They sell it to you as high density insulation and there is no difference from the rest. I do not recommend it
21/06/2023
Everything correct, high quality shutter and delivered on time.
01/06/2023
Good quality. Fast delivery. Well explained assembly.
24/05/2023
It's just as you describe it, a 10 product, I'm very happy with it.
19/05/2023
superb
17/05/2023
The shutter seems to be of good quality, the problem in my case is that I have received it with a lot of aesthetic damage that has nothing to do with the transport as it is clearly noticeable that they are manufactured... if it wasn't for this, it would be 5 stars.
27/04/2023
Good quality. As you can see on your website.
22/01/2023
I give it the highest rating because it couldn't be better.
16/12/2022
OK, I still have to mount it. I still need to mount it but I think it will not be a problem.
Online Trust is the leading quality seal for the internet in Spain. It is a distinctive seal displayed by companies that guarantee maximum transparency, security, and trust when buying and browsing their websites.
Online Trust is the leading quality seal for the internet in Spain. It is a distinctive seal displayed by companies that guarantee maximum transparency, security, and trust when buying and browsing their websites.
CONTACT US
If you need us to help you choose the product that best suits your needs, or if you have any questions, please contact us.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
3rd Party Cookies
This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages.
Keeping this cookie enabled helps us to improve our website.
Please enable Strictly Necessary Cookies first so that we can save your preferences!
Additional Cookies
This website uses the following additional cookies:
(List the cookies that you are using on the website here.)
Please enable Strictly Necessary Cookies first so that we can save your preferences!