How to connect a roller shutter switch in 5 steps

Do you want to know how to connect a roller shutter switch and not die trying? In this post, we will tell you step by step how to install these motor accessoriesYou'll find it's a piece of cake!

What is a roller shutter switch?

Let's clarify what we are talking about first of all, you can't start a house from the roof, can you? The roller shutter switch is a device that can be used for allows you to go up and down roller blinds automatically. In other words, you don't have to pull the tape manually to do it.

With at the push of a button (no need to hold it), the shutter will open or close as far as it will go. And, if you want to pause, just press the STOP key.

Installing a switch motor on a roller shutter, step by step!

There are many roller shutter motor kits. But they usually include a tubular motor, shaft couplings, regulating rod and, of course, instruction manual. In addition, you can get the shutter switch or the motor shaft.

1. COUPLING MOTOR SHAFT: put the ring gear on the motor, make sure that the flange of the motor is securely fastened to the flange of the ring gear. Then, insert the rotor coupling to the motor (the flanges must also be tightened well). This way, the ring gear will be securely attached to the rotor. Put the motor on the new shaft or the one you have already installed. Check that it is compatible: the slots in the motor must match the flange on the shaft. Finally, fix the shaft to the motor rotor.
2. MOUNT THE ENGINE BRACKET: There are two types of brackets, the crown bracket and the square bracket. The former is usually used for compact roller shutter drawers or roller blindsThe other one for on-site drawers. Remove the previous manoeuvre from the roller shutter and put the motor support in place. Then, put the shaft with the motor in place. Make sure it is well levelled.
3. ELECTRICAL INSTALLATION: cut off the power and check that this action has been effective. Make the appropriate cable connections. Identify the upstream and downstream cables of the switch for this purpose. Check that they are securely fastened.
   • When everything is ready, turn on the power and check if the up and down direction of the switch is correct, isn't it? Then I change the black and brown wires.
4. FIXING OF LIMIT SWITCHES: press the down button and let the engine stop (hold the position on the switch). Insert the rod into the lowering regulator. Turn until the perforations are in front. Raise the blind until the motor stops (again, hold the position on the switch). Take the rod and insert it into the up damper. Turn it until you find the point where you want the shutter to stop.
5. FINAL CHECK: raise and lower the shutter to check that everything is correct. If it is, close the shutter register.

Now you know how to connect a roller shutter motor, step by step.

NEVER SCREW THE ROLLER SHUTTER TO THE SHAFT, ALWAYS USE THE FASTENING STRAPS!

Is it advisable to have the roller shutter button connected or replaced by a professional?

However, the installation process is not overly complicated, it never hurts to enlist the help of an expert. He or she will have a vast knowledge of electricity and you will make sure that every wire is in place. This way, you could avoid headaches (if you are not a handyman) and prevent future problems with your switch.

Motorised or manual blinds

The truth is that this decision depends on the individual (budget, preferences, needs, etc.). In our opinion, installing motorised roller shutters is always a good idea, as they can be opened and lowered automatically at the push of a button. They are equally easy to install, but have the advantage of preventing breakdowns in the short and long term. This is basically because they prevent sudden shutter movements (which could cause breakages) and jams. On the other hand, they are easier to use than manual ones. This is especially appreciated if you have large windows or security shutters (which are heavier).

Therefore, if you can afford it, opt for a motorised roller shutter. You won't regret it, as it saves you both effort and repairs. In addition, they are very easy and convenient to use.

Conclusions on how to connect a roller shutter switch

Now you know how to connect a roller shutter switch What do you think, it's not as difficult as it seemed? If you have any problems or questions, don't hesitate to call us. We will be happy to advise you on anything you need. Without any shame, that's what we're here for.

At Sistemas24H, we have mechanical motors for pushbuttonsDon't forget to keep an eye on them to complete the installation of your push button!