How to measure window for sliding screen installation

The sliding mosquito nets stand out for being very comfortable and resistant to the passage of time. Its installation is not very complicated, it only needs, once it is mounted, to be coupled to the guide with a simple movement and it will be ready for use.

Once installed, you will find that you can slide it to either side guided by the sliding window track without having to make any effort or get in the way at all.

If we want to install a sliding mosquito net it is important to take the measurements very well, in order to guarantee an optimal and effective fastening. And that is why in this post we are going to indicate you how to measure a sliding insect screen window step by step.

How to measure a sliding mosquito net

As we have already seen, a sliding insect screen is characterised by the fact that it is installed inside the rails of the windows, so that its placement has to be well adjusted so that it works well and no insects can enter.

The steps to follow when measuring a sliding mosquito screen:

• We recommend use a metric meter and not a sewing machine, as the latter are more inaccurate in taking measurements. In addition, it is important to record measurements in millimetres.
• Measure the width. The sliding insect screen must measure the same as one of the sashes of the window where it is to be installed. It is best to measure at several points and select the smallest result.
• Measuring the height. Measure from the inside profile to the top profile, i.e. from one edge of the window to the other (the opening). This is important because the inside of the rail must never be measured. As in the case of the width, take several measurements and choose the smallest one.
• Various measures. If there are different sizes, it is better to use an adjustable angle.
• Profiles shall not exceed 4 mm in width..

Remember that this type of mosquito net is not recommended for use in a space where flower pots and other objects that do not ensure its optimal functioning are placed.

Some tips for measuring sliding mosquito nets

Here are a few tips that can help you help to measure a sliding mosquito screen in a simpler and more effective way.

• Before even choosing to install a sliding insect screen, we must check that we can install this type of insect screen in our window, i.e. that the window has a sliding sash system.
• To make sure that it will fit into the window opening so that we can open the windows easily, we have to insert a coin with a diameter of 5 cm between the window and the guide, i.e. the minimum space must be more than 3 mm.
• The rail must be at least 14 mm deep to allow effective insertion of the mosquito net.
• There must be no obstructions at the top and bottom of the window that could hinder the installation. It is recommended that there should be no objects within a distance of 20 mm.
• Adjustable castors or brackets are recommended as they remain hidden by trims and can be installed in areas with unevenness or unevenness at some point by millimetres. Variations of 4 mm are normal.
• This model of insect screen is not compatible with handles or other types of projections that do not allow the insect screen to move.
• Z-profile guide is a supplementary guide for windows that are difficult to install, being recommended for use in exterior spaces of the house or frequent use.

We leave you with a video so you can see what we have just told you:

And so far we have shown you what to do and practical advice on how to effectively measure the window to install sliding mosquito nets.