How to change an electric shutter switch?

Do you have a motorised roller shutter and you are looking to change the switch because it has broken down or you want a more modern one? Don't worry, because here we are going to help you to change electric shutter switch.

To begin with, it is necessary to know what type of push button we have installedThere are those with a single button which, depending on the direction in which it is operated, will raise or lower the shutter, as well as others that have two buttons, one for each direction. There are even models that have the typical switches that are fixed in one direction.

Here we tell you how you can change electric roller shutter switches effortlessly and in a few simple steps. We also point out some useful information related to push buttons and motorised blinds.

What is a roller shutter switch?

It is one of the more convenient methods for raising and lowering a roller shutter with little effort.

At resemble light switches and has one or two buttons for raising or lowering the motorised blind. In addition, it is aesthetically better than using a manual belt roller shutter, since it its presence will hardly be noticeable in the decoration home. It is the most popular choice among users, as it gives a more modern appearance and is more economical.

In this post we tell you how much it costs to motorise a roller shutter.

What is the functionality of an electric roller shutter switch?

Electric roller shutters have implemented a motor to replace the manual mechanism belt and pulley by a mechanised one. And both mechanisms cannot be installed at the same time.

Its operation is based on a tubular motor which is installed on the shutter shaft. The same shutter shaft can be used, so it is only necessary to install the mechanism and accessories such as the push button for it to work perfectly.

Steps for easy replacement of the roller shutter switch

In the event of damage or if you want to change electric shutter switchIf you do not have a valid password, you can follow the steps that we will indicate below:

1. Turn off the power. This can be done at the socket that connects the appliance or, for greater safety, cut off the electricity in the entire home. The important thing is that there is no electricity at the point where the work is to be carried out.
2. Next, we remove the push button cover. Simply pull out the buttons.
3. The next step is to unscrew the screws securing the plate to the mechanism housing to remove it and expose the cables.
4. Although the cables are usually marked to differentiate between the upstream and downstream cables, it is best to take a photo of the installation before taking any action in order to reconnect everything correctly.
5. To make the process quick, it is best to buy a push button with a similar connection to the one already installed. If this is not the case, the manufacturers always give the steps for installation.
6. Once the new part has been installed, with the cables in place, check that the wires and cables are in place. cables are securely connected.
7. Then, once the mechanism has been checked, we insert it into the wall and screw it into place.
8. Finally, reconnect the power supply and check that the button raises and lowers the blind correctly.

Is it advisable to have the roller shutter button connected or replaced by a professional?

Although it is not a very complicated process, it is always it is advisable to If you do not know anything about electricity or mechanics, count on a professional to change an electric shutter switch. In addition, it will ensure that the installation is done correctly the first time and avoid headaches such as a bad installation or other future inconveniences.

Advantages and disadvantages of motorised roller shutters with switches

Using a motorised roller shutter with a switch has its advantages, but it also has its disadvantages, which we will explain in the following lines.

Advantages

• It is more convenient to raise or lower the blinds thanks to the push button. It is also beneficial for people with reduced mobility.
• They will take up less space, so they will not break the aesthetics of the room by having the ribbon catcher and the ribbon itself in view.
• It functions as a home security element and works very well as an anti-theft device.
• The motorised system can be retrofitted to an existing roller shutter without having to buy a new one. A manual blind can be converted into a motorised blind.
• Depending on the weight and size of the roller shutter, a motor must be chosen that meets the appropriate specifications.

Disadvantages or drawbacks

• They are more expensive than manual blinds because they have mechanical elements that require installation.
• The use of motorised blinds can slightly increase energy costs.
• More thorough maintenance is required.
• It is necessary to hire a technician to install or replace an electric shutter switch.

Is it cost-effective to use electric roller shutters?

It is a common doubt when considering changing the roller shutter. The main one is linked to the economic aspect, although nowadays, the variety of options and the advances in technology have made that do not involve a large investment in its installation.

In addition, energy savings can be achieved, since eliminates air infiltration into the interior.

On the other hand, the reliability and resilience The cost of the repair is high and does not require a major repair if it has a high shutters are properly maintained. The most frequent faults are an electrical failure, expansion of the slats or the need to change the switch. Finally, they suffer less when going up and down, as the movement will be more fluid, stable and without jerks.

At Systems24h we have told you how changing the switch on an electric roller shutter. As you can see, it is a simple process, although it is always advisable to seek professional advice.